If you look for deburring machine! “METAL-ESTE” which a metal sheet specialists pursuit for all metal sheet specialists. ST-LINK Co., Ltd.

Deburring Machine | METAL-HANDS

Deburring Machine | METAL-HANDS

Multi-functional and convenient!

  • You could grind the surface and deburr at the same time.
  • You could deburr partly.
  • You could grind bigger size than table by dropping the side and back guards.
  • Able to dross removal, R-chamfering
  • Oxide film removal
  • It does not need air source when it starts

Deburring for small products・ for large products by guard surroundings

Processing Example

Deburring Machine | METAL-HANDS Processing Example

Grinding Brush

You could change the brush’s rotating speed by an inverter. (Max speed is 1690rpm)

Because you change brushes once without tools, you could work on Rough finishing to complete finishing quickly.

バリ取り機 | メタルハンズ ブラシ The standard brush’s roughness
#60
#80
#100
#120
#150

*Please ask about different roughness.

Sanding Pad(Option)

Sanding Pad(Option)

It is adequate to heavy burr and dross removal.
We offer you #60, #120 sanding sheets (sold separately).

Sanding Pad(Option) Processing Example

Wire Brush (Option)

Wire Brush (Option)

It is ideal for oxide film removal.

Wire Brush (Option)

Dust gathering setting (Option)

You could put a Dust-Gathering machine as an option.
You decrease the powder scattering by setting Dust-Gathering machine.

As a picture below, You could collect the powder by small power because it exhausts partly by dust gathering hood which covers the grinding brushes.

Dust gathering setting (Option)

Deburring Machine | METAL-HANDS Tabular drawing・Basic performance

METAL-HANDS

It is an all-around type for both small and large objects with wide table and central concentration fixing.

Deburring Machine | METAL-HANDS Tabular drawing

Deburring Machine | METAL-HANDS Tabular drawing

Type MH-101
Size 1250mm width 900mm depth
Table Size 1200mm width 700mm depth
Table Height 830mm
Weight 250kg
Power AC200/220V
Frequency 50/60Hz
Power 2.25kW

METAL-HANDS Mini

It is ideal for small objects processing because it could fix them with the whole table and it is very stable.

Deburring Machine | METAL-HANDS Mini Tabular drawing

Type MHS-101
Size 825mm width 740mm depth
Table Size 700mm width 650mm depth
Table Height 820mm
Weight 180kg
Power AC200/220V
Frequency 50/60Hz
Power 2.25kW
Deburring Machine | METAL-HANDS Catalogue(PDF)

Deburring Machine | METAL-HANDS Catalogue(PDF)

We offer you the catalogue for deburring machine “METAL-HANDS”.
Please check here.

PAGETOP
Deburring machine Dust-Gathering machine stainless welding laser processing
Copyright © Deburring machine “METAL-ESTE”Tsubame Niigata ST-LINK Co., Ltd. All Rights Reserved.